Skip to main content

​
Prerequisites

  • Windows 10 or later
  • WireGuard configuration file (provided by WRLD)
  • Administrator access

​
Installation

1

Download WireGuard

Download the official WireGuard client from wireguard.com/install.Click Download Windows Installer and run the installer.
2

Import Configuration

  1. Open WireGuard from the Start menu
  2. Click Import tunnel(s) from file
  3. Select the .conf file provided by WRLD
  4. The tunnel will appear in your list
3

Activate the VPN

  1. Select your tunnel from the list
  2. Click Activate
  3. The status will change to “Active” with a green indicator

​
Verify Connection

Once connected, you should see:
  • Status: Active
  • Transfer: Data sent/received values increasing
  • Latest handshake: Recent timestamp

​
Troubleshooting

  • Check your internet connection
  • Verify the configuration file is correct
  • Ensure no other VPN is active
  • Check if your IP is whitelisted on the target network
  • Verify DNS settings in the configuration
  • Contact WRLD support for assistance
  • Try a different network (avoid restrictive corporate firewalls)
  • Check if your ISP blocks UDP traffic on port 51820

​
Need Help?

Contact helpdesk@wrld.tech or use the Help Button.